RG-AP840-I(V2) Wi-Fi 6 Dual-Radio 5375 Mbps Indoor AP

●     Radio 1 – 2.4 GHz: 2×2 MIMO, two spatial streams

●     Radio 2 – 5 GHz: 4×4 MIMO, four spatial streams

Channels:

●     Radio 1 – 2.4 GHz: 20 MHz and 40 MHz

●     Radio 2 – 5 GHz: 20 MHz and 40 MHz

Combined peak data rate: 900 Mbps

●     Radio 1 – 2.4 GHz: 6.5 Mbps to 300 Mbps (MCS0 to MCS15 )

●     Radio 2 – 5 GHz: 6.5 Mbps to 600 Mbps (MCS0 to MCS31)

Radio technologies: Orthogonal Frequency-Division Multiplexing (OFDM)

Modulation types: BPSK, QPSK, 16-QAM, 64-QAM

Packet aggregation:

●     Aggregate MAC Protocol Data Unit (A-MPDU)

●     Aggregate MAC Service Data Unit (A-MSDU)

Dynamic Frequency Selection (DFS)

Cyclic Delay/Shift Diversity (CDD/CSD)

Maximum Ratio Combining (MRC)

Space-Time Block Coding (STBC)

Low-Density Parity Check (LDPC)

Transmit beam-forming (TxBF)

●     Radio 2 – 5 GHz: 4×4 MIMO, four spatial streams

Channels:

●     Radio 2 – 5 GHz: 20 MHz, 40 MHz, 80 MHz, and 160 MHz

Combined peak data rate: 3.467 Gbps

●     Radio 2 – 5 GHz: 6.5 Mbps to 3.467 Gbps (MCS0 to MCS9)

Radio technologies: Orthogonal Frequency-Division Multiplexing (OFDM)

Modulation types: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM

Packet aggregation:

●     Aggregate MAC Protocol Data Unit (A-MPDU)

●     Aggregate MAC Service Data Unit (A-MSDU)

Dynamic Frequency Selection (DFS)

Cyclic Delay/Shift Diversity (CDD/CSD)

Maximum Ratio Combining (MRC)

Space-Time Block Coding (STBC)

Low-Density Parity Check (LDPC)

Transmit beam-forming (TxBF)

●     Radio 1 – 2.4 GHz: 2×2 uplink/downlink MU-MIMO, two spatial streams

●     Radio 2 – 5 GHz: 4×4 uplink/downlink MU-MIMO, four spatial streams

Channels:

●     Radio 1 – 2.4 GHz: 20 MHz and 40 MHz

●     Radio 2 – 5 GHz: 20 MHz, 40 MHz, 80 MHz, and 160 MHz

Combined peak data rate: 5.378 Gbps:

●     Radio 1 – 2.4 GHz: 8.6 Mbps to 0.574 Gbps (MCS0 to MCS11)

●     Radio 2 – 5 GHz: 8.6 Mbps to 4.804 Gbps (MCS0 to MCS11)

Radio technologies: uplink/downlink Orthogonal Frequency-Division Multiple Access (OFDMA)

Modulation types: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM

Packet aggregation:

●     Aggregate MAC Protocol Data Unit (A-MPDU)

●     Aggregate MAC Service Data Unit (A-MSDU)

Dynamic Frequency Selection (DFS)

Cyclic Delay/Shift Diversity (CDD/CSD)

Maximum Ratio Combining (MRC)

Space-Time Block Coding (STBC)

Low-Density Parity Check (LDPC)

Transmit beam-forming (TxBF)

WPA3

●     2.4 GHz: two built-in omnidirectional antennas, the max. antenna gain is 5.9 dBi.

●     5 GHz: two built-in omnidirectional antennas, the max. antenna gain is 6.2 dBi.

Bluetooth

●     One integrated vertically polarized omnidirectional antenna, the max. antenna gain is 4.6 dBi.

1 x 5GE combo SFP port, compatibility with 1GE and 2.5GE, and multiplexing with 1 x 100/1000/2500/5000Base-T RJ45 Ethernet port

1 x 10/100/1000Base-T RJ45 Ethernet port with auto-negotiation

1 x RJ45 console port (serial console port)

1 x USB 3.0 (Type-A connector)

1 x Bluetooth 5.1

●     AP power-on status

●     Software initialization status and upgrade status

●     Uplink service interface status

●     Wireless user online status

●     CAPWAP tunnel timeout

●     Specific AP locating

●     Press the button for shorter than 2 seconds. Then the device restarts.

●      Press the button for longer than 5 seconds. Then the device restores to factory settings.

Shipping: 284 mm x 262 mm x 124 mm (11.2 in. x 10.4 in. x 4.9 in.)

Mounting bracket: 0.1 kg (0.22 lbs)

Shipping: 1.25 kg (2.76 lbs)

●     54 V DC/1.1 A power input over DC connector: The DC connector accepts 2.1 mm/5.5 mm center-positive circular plug. A DC power supply needs to be purchased independently.

●     PoE input over LAN 1: The power source equipment (PSE) complies with IEEE 802.3af/at/bt standard (PoE/PoE+/PoE++).

Note: If both DC power and PoE are available, DC power is preferred.

●     DC power: 40 W, 2.4 GHz radio 2×2, 5 GHz radio 4×4, LAN 2 for PoE supply, and USB port enabled

●     802.3bt (PoE++): 40 W, 2.4 GHz radio 2×2, 5 GHz radio 4×4, LAN 2 for PoE supply, and USB port enabled

●     802.3at (PoE+): 22 W, 2.4 GHz radio 2×2, 5 GHz radio 4×4, LAN 2 and USB port that fail to provide power for external devices (PoE out disabled of LAN 2 and USB port disabled)

●     802.3af (PoE): 12.95 W, 2.4 GHz radio 1×1, 5 GHz radio 1×1, LAN 2 and USB port that fail to provide power for external devices (PoE out disabled of LAN 2 and USB port disabled)

●     Idle mode: 10.3 W

supply

●     The USB port can source 1 A/5 W power to an attached device.

●     The LAN 2 port can source 48 V/12.95 W power to an IoT unit.

Storage humidity: 5% RH to 95% RH (non-condensing)

Operating temperature: –10°C to +50°C (14°F to 122°F)

Operating humidity: 5% RH to 95% RH (non-condensing)

At an altitude between 3,000 m (9,842.52 ft.) and 5,000 m (16,404.20 ft.), every time the altitude increases by 166 m (546.81 ft.), the maximum temperature decreases by 1°C (1.8°F).

Between Failure

(MTBF)

●     Max. transmit power: 27 dBm (500 mW)

●     Minimum transmit power: 7 dBm (5.01 mW)

5 GHz

●     Max. transmit power: 30 dBm (1000 mW)

●     Minimum transmit power: 9 dBm (7.94 mW)

Note:

●     Adjusting the transmit power by percentage (recommended) and in 1dBm increments.

●      The transmit power is limited by local regulatory requirements.